How to use Outdoor Camping Cool Box?

Cooler for outdoor is a type of heat exchanger used to cool fluid.Water or air is usually used as a coolant to remove heat.It can be divided into column tube cooler, plate cooler and air cooler.Travel cooler bag are heat exchange devices commonly used in metallurgical, chemical, energy, transportation, light industry, food and other industrial sectors.

It is suitable for Freezer cool bag , condensing, heating, evaporation and waste heat recovery.Therefore, the cooler and tubular heat exchanger are still in an important position among various heat exchangers.

Go outdoors cool box is a type of heat exchanger used to cool fluid.Water or air is usually used as a coolant to remove heat.There are wall cooler, spray cooler, jacket cooler and snake-tube cooler.It is widely used as a pure water, water wind, oil water and oil air cooling device for high power silicon rectifier, induction furnace and intermediate frequency furnace and other large electrical equipment.

Cooler with recuperative, hybrid, regenerative switch as the main object, the working principle of the cooler, heat transfer calculation, structure calculation, flow resistance calculation and design program, in heat exchanger were more illustrations and detailed examples.

Installation 

The installation method of the cooler is divided into vertical cooler and horizontal cooler. The vertical cooler has the characteristics of small installation area and convenient installation.Horizontal cold oil has characteristics of pressure drop is small, resistance to water impact, so according to the different space, space, such as height, the use of performance requirements correctly choose vertical or horizontal cold oil, can better meet the needs of the generator sets and other equipment.

(1) the cooler shall not be put into use until it has passed the crushing test, and the front row shall be fully used for internal storage.

(2) check whether the emptying and emptying valves are flexible and easy to use and switch positions, and whether all pressure gauges and thermometers are installed.

(3) check whether the foundation and support are firm, and whether the bolts of each part are fully fastened and fastened.

(4) during the investment, the cold flow is first followed by the hot flow.

(5) when using cold or hot media, first of all, make sure the auxiliary line is unblocked, and then slowly open the exit valve. After checking that there is no problem, open the inlet valve, and make sure to open slowly to prevent suffocating pressure.Pay attention to the change of equipment during the application process.After the cooler is put into use, leakage may occur with the change of temperature and pressure.